ONYX DRIVER COMPATIBILITY

ONYX DRIVER COMPATIBILITY

If you need to quickly see which driver you need to install on your system for your mixer or interface, you can cross reference it with your operating system using this chart.

  XP XP Service Pack 2 XP Service Pack 3 Vista Vista Service Pack 2  Windows 7 Windows 8 Mac OS 10.5 - 10.6.7 Mac OS 10.6.8 - 10.8  
Onyx-i Serials Beginning with 204 Not Supported Not Supported PC v4.1 PC v4.1 PC v4.1 PC v4.1 PC v4.1 Not Supported Mac v4.1  
Onyx-i Serials Beginning with 003 Not Supported PC v1.7 PC v1.9 PC v1.7 PC v1.9 PC v1.7 Not Supported Mac Core Audio Mac Core Audio  
Onyx FireWire Option Card v1.1.1 PC v1.7 PC v1.7 PC v1.7 PC v1.7 PC v1.7 Not Supported Mac Core Audio Mac Core Audio  
Onyx Blackbird PC v4.1 PC v4.1 PC v4.1 PC v4.1 PC v4.1 PCv4.1 PC v4.1 Mac v3.5.2 Mac v4.1  
Onyx Blackjack Not Supported USB PC v3 USB PC v3 USB PC v3 USB PC v3 USB PC v3 Not Supported Mac Core Audio Mac v4.1  
Onyx Satellite Not Supported PC v1.7 PC v1.7 PC v1.7 PC v1.7 PC v1.7 Not Supported Mac Core Audio Mac Core Audio  

 

*PC Driver v1.9 and Mac OS Core Audio for Onyx-i mixers do not support device aggregation. This means you cannot connect multiple Onyx-i devices to the same computer for simultanous use. Similarily, you cannot aggregate Onyx-i mixers with Onyx Blackbirds.

*Drive v4.1.0 + Control Panel v1.0.0 do support device aggregation on PC and Mac with other Onyx-i mixers, as well as Onyx Blackbirds (up to four devices). Note that if you are connecting an Onyx-i mixer to a PC or Mac by itself, the above PC or Mac driver is the    appropriate driver for that setup. However, if you are planning to aggregate the Onyx-i mixer with an Onyx Blackbird, you will need the latest driver and control panel for the Onyx Blackbird which installs the Onyx Blackbird control panel and allows you to aggregate it with other Onyx-i mixers starting with the serial number 204.

Questions? Contact us. 

← Back to blog