#WEDNESDAYWISDOM - STUDIO ACOUSTICS

#WednesdayWisdom – Studio Acoustics

Even in today’s earbud-oriented world, the importance of a good mix environment can’t be understated. You never know where your music will be heard, and you need to know your mix will translate to a wide range of end-user scenarios. Mixing on headphones is no substitute for a good set of accurate monitors in an acoustically treated room. That’s why upscale recording studios routinely include acoustic designers in their construction budgets, spending considerable sums of money in pursuit of sonic perfection.

Sadly, for the average musician, budgeting for acoustic treatment tends to rank well below the more tangible fun stuff like instruments, mics, recording gear, plug-ins, and other toys. Even if you’re at liberty to physically alter your space without incurring a landlord’s wrath, budgeting for two-by-fours, sheetrock and caulking don’t tend to hold the same appeal as that new keyboard or channel strip plug-in you’ve been pining for.

Fortunately, the same technological revolution that has brought multitracking into spare bedrooms and one-car garages has also created low-cost solutions for many of the common acoustical issues facing the average project studio.

Speakers First

Before we even discuss the room, let’s address the source – your monitors. It’s critically important to start out with a set of near-field monitors you can trust. While most of us don’t have pockets deep enough for a multi-thousand dollar speaker system, these days it’s not hard to find a set of studio speakers that deliver an unvarnished, honest representation of what you’re hearing.

Avoid consumer stereo speakers, iPhone speakers, and other commercially oriented loudspeakers that are designed to hype certain frequency ranges, and focus on getting at least one set of dedicated studio monitors designed to deliver flat, even, and accurate response. Better yet, get a good set of monitors and a second “B” set to compare your mix on. Switching between them can be easily accomplished with a studio control device.

Once you’ve got a set of speakers you can believe in, it’s time to tackle your room’s acoustics.

Scratching the Surface

Acoustics is a long and deep subject that’s well beyond the scope of a meager blog post. There are plenty of authoritative books on the subject, like F. Alton Everest’s classic “How to Build a Small Budget Recording Studio from Scratch,” as well as a wealth of great articles in print and online. But let’s take a brief look at some of the most common issues we encounter in our musical spaces, and some of the means available to address them.

Let’s start by (very unscientifically) dividing the concept of acoustic treatment into some basic categories. There’s insulation, which usually entails keeping the sounds of the outside world out, or keeping your own sounds in. Closely related is isolation – the art of keeping individual sounds from bleeding too heavily into each other.

The other challenge is a bit more subtle and has to do with how our rooms affect the sounds we’re creating in them. In any given space, the characteristics of that space have a direct effect on what we’re hearing. That’s why an instrument will sound different in a large hall than it will in a small rehearsal room. It’s also the reason your mix sounds so different in your home studio than it does when you play it back for others anywhere else.

The average home studio or rehearsal space rarely does well in addressing any of these issues. Most of us are working in a spare bedroom, converted garage, basement, or other household space, none of which boast construction aspects that are in any way conducive to good sound. Thin, parallel walls, boxy shaped rooms, low ceilings and rattling window frames are only some of the enemies we face.

Even a few short years ago, the only way to address these issues involved massive amounts of money, materials, and frustration. While the ultimate solution is still to plan and construct a purpose-built environment from the ground up, these days there are a number of ways to markedly improve your odds of making your workspace sound better without having to sell your instruments or smash your fingers.

Soundproofing and Insulation

One of the most frustrating aspects of sound is that it will go where it wants to, and find its way through any space via any available path. That’s why it’s so important (and so difficult) to block any potential points where sound can leak through. In all cases, mass is your friend – the thicker and denser your walls are, the better they’ll be at stopping the sound.

Even more effective is mass combined with air. The most common construction technique is what’s known as a “floating room,” where an entirely new set of walls, floor, and ceiling are built within the existing space, detached and separated by several inches from the outside walls (and, in the case of flooring, by rubberized “floaters” that lessen the transfer of vibrations). If you’re constructing your own space, there are companies that offer soundproofed doors and windows, as well as soundproof wall panels in pre-set or custom sizes.

Even if you don’t have the luxury of new construction, sealing areas of potential leakage in your existing structure will go a long way toward keeping the inside sounds in and outside out. For doors and window frames, look for the thickest, most dense weather-stripping that will fit in the allotted space. Use caulking to seal around areas like heating and air conditioning ducts, electrical outlet boxes, lighting fixtures, unfinished drywall joints and, if you’ve got them, tiled ceilings. While there are countless varieties of commercially available caulks and sealants, consider a latex sealant designed for acoustical applications.

You can also accomplish a lot by adding sound blocking layers to your existing walls. Several companies offer low-vibration materials which are exceptionally dense but surprisingly thin and lightweight.

If You Can't Do the Whole Room…

For many of us, especially those who can eschew live drums, the toil, and expense of insulating the entire room can be avoided by simply isolating only those elements that need it. In traditional studios, isolation booths have long been used to separate the vocalist or drummer during a live take. While these tend to be of the permanently-constructed variety, a number of companies offer various sizes of portable, lightweight “iso-booths” that can be assembled quickly and easily when and where you need them. Alternatively, you can search the web and find plans to build your own.

Another variation on the iso-booth that has become increasingly popular is the amplifier chamber. These can vary from small, soundproofed boxes just large enough to hold your guitar amp and a mic stand, to cabinets with speaker and mic (XLR) jack built in.

Your Biggest Fan

Particularly if your music machine is a desktop computer, it can be one of the biggest contributors to noise in your studio space. Particularly if your room is otherwise relatively quiet, the background hum of one or more computers can adorn your delicate acoustic tracks with all the ambiance of a runway at Heathrow.

If you’re reasonably computer-savvy (or know someone who is), replacing your computer’s stock fan with a whisper-silent one is a quick way to reduce the noise. Another option is to look into sound-dampening cases with quiet cooling systems, which can knock off several decibels of noise, as well as cabinets that will completely enclose your computer’s CPU.

Semi-Isolation

In many cases, complete isolation is neither necessary nor desirable. As anyone who has ever recorded a live band will tell you, a little leakage can be a good thing, adding a natural sounding element that’s sometimes lost by separating things too much. Sometimes a bit of baffling between players and/or amps is all that’s necessary to provide enough separation for a decent recording.

This is typically accomplished with a gobo, a small portable wall panel around four or five feet tall. Many people build their own, sometimes covering one side with carpet or other absorbent material, the other with a reflective surface like parquet, and putting them on wheels for easy maneuvering. You can also find pre-manufactured versions of these, as well as transparent acrylic panels to surround the drummer but still allow for that all-important eye contact.

Fixing the Vibe

Let’s shift gears now and talk about the other major challenge in any studio: controlling the sonic characteristics of your space. Every acoustic environment’s sound is dictated by a number of factors, including the distance between walls, the height of the ceiling, the angles at which the walls meet, and the materials comprising the surfaces, not to mention the composition and placement of tables, pictures and other surfaces, furniture, curtains, etc.

For the vast majority of us, our creative environments end up being places like basement rooms, garages or second bedrooms – typically smallish boxes with parallel walls. These types of spaces tend to encourage the buildup of standing waves, resonant frequencies and other sonic anomalies that can substantially color what we’re hearing, rarely for the better. The hard surface of a side or rear wall can create reflections that can significantly change the sound of your mix.

Step One – Identify the Problem

Many of today’s software programs offer tools to help identify some of the most common issues. Spectral analyzers, also known as Real Time Audio meters (RTA’s), are basically meters that break the sound down by various frequency groups and can tell you a lot about what your room is (or isn’t) doing to your mix. By using a reasonably sensitive microphone in various spots throughout the room, an RTA can help to identify areas where there’s an excess buildup of certain frequencies. Some audio software applications have RTA’s built into the program. You can also get dedicated software or hardware units that can perform the same function.

One important caveat here: meters can be invaluable when used correctly, but meters don’t mix music – your ears do. Trust your ears first and foremost. Listen and compare, then use the meters to verify what you’re hearing.

Stop and Reflect

Generally, your best defense against unwanted reflections is to attack problem areas with a combination of absorption and diffusion. Absorptive materials prevent or greatly reduce reflection, while diffusers break up the reflection, scattering the waves in a multitude of different directions and greatly lessening their impact.

Much can be accomplished using common sense and everyday materials. The rear wall of my office/project room has a large, floor-to-ceiling bookshelf, fully stocked. Heavy carpeting and thick, theater-style curtains also work well, and you’d be surprised at the difference a strategically placed overstuffed sofa can make. A number of commercial (and slightly less unwieldy) products are also available, including acoustic foams, fiberglass panels, and blankets.

Also available are a number of diffuser products – geometrically-shaped panels and materials that, attached to your flat surfaces at strategic locations, can go a long way toward breaking up and eliminating reflections. And a number of companies offer products created of dense, uneven materials that will both absorb and diffuse sound waves, giving you the best of both worlds.

Bass traps, also known as barrel diffusers, are another popular means of addressing specific areas of your environment. Their typically cylindrical shape and uneven, absorptive finish work wonders to break up reflections in problem areas of your room. Some people construct these from plastic trash cans, though less inelegant versions are available commercially. Many companies offer bass traps that also perform as speaker stands, studio furniture, and even entire modular environments.

Conclusion

As we said upstream, the science of acoustics can be wide-ranging and confusing. While we know a lot about how sound behaves and what to expect out of a given space, there are always enough variables to keep it interesting. A new instrument, more bodies in the room, even changes in the weather….everything can influence the way things sound. What works for one situation may not be ideal for another, and the best we can do is to try and create as neutral and objective a listening environment as possible. Arm yourself with good monitors, meters, and spectral analyzers, identify and correct obvious problem areas, and listen to as many different types of music, mixes and instruments as you can. But at the end of the day the most important tools you have are your ears – if it sounds good, it probably is good.

Image sources:

• Image 1: carltatzdesign.com
• Image 3: fmdesign.com
• Image 4: rationalacoustics.com
• Image 5: acousticalsolutions.com

← Back to blog