FAQs

When setting up your SRM speaker, it is very important that you DO NOT connect it to the output of an amplifier. The inputs of the SRM series are made for non-powered outputs such as the main or aux outputs from a mixer. The outputs of an amp will easily damage and potentially cause a fire in just about any powered speaker such as the SRM series.

First, go to the config menu on both speakers and choose the factory restore option to reset them. This will clear all previously paired devices and will reset the link settings.
 
Next, connect a phone, tablet or other bluetooth enabled device to ONLY ONE speaker. This is the most important part. If Bluetooth is paired to both the primary and secondary speaker, the link feature will malfunction.
 
Once the device is connected to the primary speaker via Bluetooth, attempt to link the two speakers together.
 
After the speakers are successfully linked together, make sure the “Auto Link” option is enabled in the BT Setting menu within the config menu on both speakers.

It is normal for the SRM to emit a slight "pop" when it is powered up or down. The pop is caused by electricity left inside the amplifier circuitry discharging to the speaker.

Low Frequency
10 in / 254 mm [SRM210]
12 in / 305 mm [SRM212]
15 in / 381 mm [SRM215]
with ferrite

High Frequency
1.4 in / 36 mm polymer compression driver

Frequency Response (–10 dB)
45 Hz – 20 kHz [SRM210]
42 Hz – 20 kHz [SRM212]
40 Hz – 20 kHz [SRM215]

Frequency Response (–3 dB)
55 Hz – 20 kHz [SRM210]
50 Hz – 20 kHz [SRM212]
44 Hz – 20 kHz [SRM215]

Mic-Line Impedance 20 kΩ balanced
1/4" Hi-Z Impedance 100 kΩ balanced
Direct Out and Mix Out Male XLR Balanced
Mix Out Impedance 300 Ω balanced

SRM210 | V-Class:
Height: 23.0 in / 584 mm
Width: 15.1 in / 384 mm
Depth: 12.9 in / 328 mm
Weight: 30.9 lb / 14.0 kg

SRM212 | V-Class:
Height: 25.9 in / 658 mm
Width: 15.2 in / 386 mm
Depth: 14.2 in / 361 mm
Weight: 40.6 lb / 18.4 kg

SRM215 | V-Class:
Height: 28.8 in / 732 mm
Width: 17.6 in / 447 mm
Depth: 15.4 in / 391 mm
Weight: 48.9 lb / 22.2 kg

Bluetooth 4.2

These speakers tilt at a 45 degree angle for stage monitoring applications.

0 – 40 °C
32 – 104 °F

This model utilizes the PA-A3 eyebolt kit. You can buy it from your preferred Mackie dealer!

Amidst other physical factors, Bluetooth operates in a very narrow radio frequency band around 2.4GHz which has it competing with numerous other devices in the same range.

Check out our Bluetooth Optimization Guide for more info and best practices on dealing with these physical limitations.

Of course we will!

System Power Amplification
Rated Power: 2000 watts peak

Low Frequency Power Amplifier
Rated Power: 1800 watts peak
Rated THD: <1%
Cooling: Convection
Design: Class D

High Frequency Power Amplifier
Rated Power: 200 watts peak
Rated THD: <1%
Cooling: Convection
Design: Class D